switch to room list switch to menu My folders
Go to page: First ... 118 119 120 121 [122] 123 124 125
[#] Mon May 16 2016 01:32:50 EDT from ax25 @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

Ragnar, I think that is the best use of the 3d printing tech. I am always searching for hours online to find a part that is 1. Cheap, 2. Cheap to ship, 3. Will do the job.
If I could assess in a matter of hours if a part downloaded from the internet would work, I could skip point 2 and just focus on 1 and 3.

[#] Mon May 16 2016 06:50:38 EDT from zooer @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

Here is an example of that put to use.

A plastic knob on my mother's mixer broke, the metal screw was fine. I found this, printed it, and fixed it for less than a dollar.  I heated the screw, pushed it into the new knob, the plastic melted and snugly sealed around the metal screw.  I see other people had the same problem.

[#] Mon May 16 2016 07:01:05 EDT from zooer @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]


Mon Apr 11 2016 03:35:32 PM EDT from IGnatius T Foobar @ Uncensored

The truly useful applications of 3D printing will appear when they can print at a molecular level, or at least multiple materials at a super fine pitch.
Until then ... injection molding machines operated by factory workers at $0.11 an hour in China are still a more viable option.

Apparently you think 3D printing can only be and should only be used for mass production.


They have 3D food printers, but that is more artsie-fartsie food fantasy.  Of course soon all fast food will be made by machine.

[#] Mon May 16 2016 09:06:56 EDT from IGnatius T Foobar @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

Just the opposite, actually.  3-D printing is going to be great for *small* manufacturing runs.  Custom designs for a single job where you only need half a dozen pieces are now practical.

Think about the processes currently used to manufacture circuit boards.  I have an engineer friend who is regularly faced with the same choice for any particular board: fab it himself, or send it to China.  Even at a small quantity, the 11 year old girl in China can fab the board cheaper than he can with his own tooling.  But he has to wait for it.  If he needs it "now" he gets out the materials and does it in his own shop.

Advanced 3-D printing will do the same for pieces and parts of any type.

As for machine-manufactured fast food ... that's a politics problem not an engineering problem.

[#] Tue May 17 2016 01:26:05 EDT from vince-q @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

They have 3D food printers, but that is more artsie-fartsie food
fantasy.  Of course soon all fast food will be made by machine.

Hopefully they won't be printers.

[#] Tue May 17 2016 11:18:39 EDT from LoanShark @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]



[#] Tue May 17 2016 13:29:09 EDT from Ragnar Danneskjold @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

The Matias keyboard I was using on my Macs for years finally gave up the ghost....
In search of a new buckling spring keyboard, I bought a Unicomp. It looks like an old IBM Model M keyboard - the greatest keyboard ever made, and if you don't agree, you're wrong - but the quality isn't really there. I'll use if, but I may wind up buying an Matias again. There's weird plastic flashing visible on some of the key caps. There are a few keys where the height isn't perfectly consistant. The blue LED's are too bright. There are some gaps where there really shouldn't be (the whole left side of the keyboard). But the classic feel is there. Too bad the sound isn't as good as the old Model M.

Anyway, if you like the keyboards of yesteryear, it's a reasonable facsimile.

[#] Tue May 17 2016 13:32:31 EDT from Ragnar Danneskjold @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

Oh, and if there are any other Model M fans out there, check out:

[#] Thu May 19 2016 08:53:11 EDT from IGnatius T Foobar @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

There's also a Tactile Keyboard FAQ at maintained by Eric Raymond.

And yes, the M is the best keyboard ever, but it's the best for people who TYPE. People who are hardcore gamers may be looking for different features, and frankly if all they do is pound on the keyboard like a game controller, they don't deserve an M. :)

Nothing but M for me. I've got two that are in good working order, one at home and one at work. When I have to type during a conference call I sometimes move my hands over to the laptop keyboard to make less noise.

[#] Thu May 19 2016 09:00:05 EDT from IGnatius T Foobar @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

I'm also giving some consideration to switching from a mouse to a trackball.
The "real computer users" community seems to like the Logitech M570. Dunno if anyone has had any experience with any other products.

[#] Thu May 19 2016 11:36:37 EDT from ryan42 @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

I prefer the Alps-switched boards myself. I use some ancient Apple Extended II's and PS/2 SGI keyboards that are nearly Dell AT101W's, along with actual AT101W's. They're better for my fingers.

[#] Thu May 19 2016 11:43:35 EDT from ryan42 @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

For trackballs I have been using Kensignton ones for years. I strongly dislike the M570 and similar because I have never understood trackballs where you operate the ball using only your thumb. Kensington's offerings are symmetrical and huge and I've found them to work well. I have some of the older TurboMouse and Orbit models on older comptuers but I use the newer ExpertMouse (the USB ones) and just recently got one of the Bluetooth ExpertMouse wireless models for my laptop. It has both Bluetooth and one of those non-Bluetooth wireless nano receivers and a switch on the bottom selects which to use, so you can somewhat easily move it between a laptop and a desktop if you want.

I have tried the Slimblade one and decided its not for me. I don't like how the scrolling action works (rotating the ball rather than the dedicated scroll ring). Otherwise Kensington gets my vote.

My other trackball-loving friend swears by CST (Clearly Superior Technologies) which seems to be a favorite in some circles... here's one of theirs on Amazon: <> and their website: <>. I am sure they are technically better than the Kensingtons (higher DPI, etc) but they don't look like they'd be as ergonomic to use so I have never tried one.

[#] Thu May 19 2016 14:24:47 EDT from Ragnar Danneskjold @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

If you like the Alps key switches, check out the keyboards by Matias. They're quite good.

[#] Thu May 19 2016 14:25:45 EDT from Ragnar Danneskjold @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

As for trackballs, I've never been able to get the hang of them... I tried one out for a while, but found it too twitchy for my tastes. Also, it seemed to make wrist pain worse at least for me.

[#] Thu May 19 2016 16:03:41 EDT from IGnatius T Foobar @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

The web site for Matias seems to imply that Alps no longer makes the switches, so Matias is now manufacturing their own? Is that true, there's no more Alps-type switches outside of Matias?

[#] Thu May 19 2016 17:05:42 EDT from Ragnar Danneskjold @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

Matias is it....

[#] Fri May 20 2016 13:28:49 EDT from ryan42 @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

I have a Matias Tactile Pro 3 that I used for years and years but I went back to the old Apple Extended because the bottoming out and overall feel is softer, where the Matias feels like it sends little shockwaves up my fingers.

I have wanted to try the Quiet Pro as I have heard it is better in this regard and closer to the AEK in its feel, but I haven't had a chance yet.

[#] Mon May 23 2016 16:42:10 EDT from dothebart @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

I've revived my Cherry G80-5000 using a soarer converter:


If you google around a bit around that, they also do a diy keyboard.

[#] Fri May 27 2016 12:08:01 EDT from Ragnar Danneskjold @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

I picked up a Intel Compute Stick and a Logitech K400 keyboard to use as a quickie PC to watch videos with on the main TV at home. Loaded up Kodi....
Fun little toy for under $150 bucks total.

[#] Sat May 28 2016 23:56:11 EDT from IGnatius T Foobar @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

Well, it seems word got out and someone got me the M570 trackball as a birthday present.

So far I think it feels pretty good, although there are times when I forget I have a trackball there and my first instinct is to slide the entire device across the desk. Aside from that, it matches the size and shape of my hand pretty well. I'm not at my main computer desk right now because we have a guest sleeping in that room. The desk is higher than the table I'm currently at, so I think when I get there my wrist won't be as extended as it currently seems to be when I grasp the M570.

Now I just need to find an old copy of Marble Madness. Did they ever make a trackball-ready version of that game for any platform other than Amiga?

Go to page: First ... 118 119 120 121 [122] 123 124 125