Language:
switch to room list switch to menu My folders
Go to page: First ... 99 100 101 102 [103] 104 105 106 107 ... Last
[#] Sun Apr 23 2017 11:48:47 EDT from bennabiy @ Uncensored

Subject: Re: Minor issue with EasyInstall overwriting messages directory contents

[Reply] [ReplyQuoted] [Headers] [Print]

Thank you :)

Sat Apr 22 2017 07:11:58 PM EDT from IGnatius T Foobar @ Uncensored Subject: Re: Minor issue with EasyInstall overwriting messages directory contents
Just a note...the last couple of EasyInstall based updates/upgrades
have clobbered my hello and goodbye files (as well as everything
else).

It happens on my system too and is a nuisance. Will look into it.

 



[#] Sun Apr 23 2017 15:51:55 EDT from vnaster @ Uncensored

Subject: Re: Server Relaying and Local delivery of Emails

[Reply] [ReplyQuoted] [Headers] [Print]

Dear Citadel Community,

Managed to install Citadel to the latest version on Trisquel (scraped Debian) following Easy-install instructions and not apt-get .

Also managed to download emails from remote POP3 using directions below.

However I still cannot understand some functions of Citadel after reading FAQ and would greatly appreciate further assistance.

REMARK/PROPOSAL: At the first try of Easyinstall, I was hitting my head against the wall, because I couldn't figure out what was wrong with it (had continuous errors) now working properly on my system. In the end I found your article referring to Debian/Ubuntu prerequisites and solved every problem. Perhaps you could move the Ubuntu/Debian prerequisites article on the FAQ Section since there are awful a lot of people using variants of these OS today.

QUESTION(1): How can we make a small donation to Citadel project?

QUESTION(2): Are there any scripts/rules like outlook for categorizing/moving emails between Rooms? I am asking because although remote POP3 download worked (see below) however it worked on a different folder than the default inbox folder (the one marked MAIL on My folders - POP3 download wouldn't work by no means in any version) on citadel. I was hoping to automatically move emails between rooms and avoid fragmented incoming emails which it is a recipe for Information Overload.

Thanks for everything

Vnaster

 

Thu Apr 20 2017 12:30:40 EDT from bennabiy @ Uncensored Subject: Re: Server Relaying and Local delivery of Emails

Vnaster,

 

Often the best way to get the most current version is to use Easy Install method, rather than the packages in the repository. Often those packages in the repository are at the mercy of the time of those who have maintained them, and if I remember correctly, the Debian ones have not really been touched since 2015 at least.

 

IG could probably provide more info...

Thu Apr 20 2017 07:25:30 AM EDT from vnaster @ Uncensored Subject: Re: Server Relaying and Local delivery of Emails

Many Thanks IGgnatius!

Can we make small donation to Citadel? Is there an IBAN available, how is this possible?

You gave me a good lead i will try out what you have suggested. Scary as it may seem, to me as as accountant, I will try to host an email myself.

Possibly a custom MX record could do the trick and host not the primary emails, risking total oblivion, but a subdomain email.


By the way, I have noticed that my very very new test Citadel server has version 8.24 despite the fact that it was created three days ago..

REMARK/QUESTION: Don't we get the latest version of CITADEL by writing in Debian Terminal the following:

su

apt-get install citadel-mta

apt-get install citadel-suite

It there something in your repository probably that needs updating? Possibly wrong set of commands inputted?

I will check to see on your wiki to see how i update is made properly

Thanks again,

Vnaster

 

 

Wed Apr 19 2017 12:54:49 EDT from IGnatius T Foobar @ Uncensored Subject: Re: Server Relaying and Local delivery of Emails
The email had a From Field that was admin@citadel and thus couldn't be possibly replied to. Can this be fixed?  I tried  site-wide-configuration -> SMTP Servers -> Correct Forged From -> Only Change the From (...)  but no luck. Any idea how this is fixed?

Keep in mind that when you use a smart-host that requires authentication, very often the smart-host will rewrite the sender's email address to "what it's supposed to be".  Citadel itself will do this, if you use it as a smart-host.   Another example: if you use gmail as a smart-host, it'll rewrite the sender's email address, but not the display name.

If the message is going out from Citadel as "admin@citadel" then you need to set your fully-qualified domain name in the global system configuration, and then edit your account to have a proper email address in that domain.

 

Also any idea how I can receive and categorize emails in Citadel from remote POP3? Tried clicking Rooms -> Mail, then Advanced -> Edit (..) this Room -> Remote Retrieval, there i filled the host, user details, ect but no luck.. any idea how these details are filled properly?

You're in the correct place.  And the newest version of Citadel will try both POP3 and POP3S.  Maybe turn up your logging to "debug" and watch it try to fetch?

 

OPINION - Hosting Citadel on Raspberry pi: Good Idea (Easy to use for 10-emails-a-day , Scale-able, replaceable,) or Bad Idea (Potentially painfully slow and unworkable, SD card : doggy drive VS HDD ect, death trap ect.)

Lots of people do this.  It seems to work fine.  I'd suggest running it on a "real disk" (either HDD or SSD) rather than on an SD card, though.

 



 



 



 



[#] Sun Apr 23 2017 18:08:45 EDT from vnaster @ Uncensored

Subject: Re: Server Relaying and Local delivery of Emails

[Reply] [ReplyQuoted] [Headers] [Print]

Found this and seems really interesting:http://www.citadel.org/doku.php/faq:everydayuse:sieve#createaddarule

Does this apply to sent items too?  We are trying to save sent emails per room.

I suggest you add this to the FAQ too including in the title the world rule, so that everyone understands that the all functionality is there

Thanks,

Sun Apr 23 2017 15:51:55 EDT from vnaster @ Uncensored Subject: Re: Server Relaying and Local delivery of Emails

Dear Citadel Community,

Managed to install Citadel to the latest version on Trisquel (scraped Debian) following Easy-install instructions and not apt-get .

Also managed to download emails from remote POP3 using directions below.

However I still cannot understand some functions of Citadel after reading FAQ and would greatly appreciate further assistance.

REMARK/PROPOSAL: At the first try of Easyinstall, I was hitting my head against the wall, because I couldn't figure out what was wrong with it (had continuous errors) now working properly on my system. In the end I found your article referring to Debian/Ubuntu prerequisites and solved every problem. Perhaps you could move the Ubuntu/Debian prerequisites article on the FAQ Section since there are awful a lot of people using variants of these OS today.

QUESTION(1): How can we make a small donation to Citadel project?

QUESTION(2): Are there any scripts/rules like outlook for categorizing/moving emails between Rooms? I am asking because although remote POP3 download worked (see below) however it worked on a different folder than the default inbox folder (the one marked MAIL on My folders - POP3 download wouldn't work by no means in any version) on citadel. I was hoping to automatically move emails between rooms and avoid fragmented incoming emails which it is a recipe for Information Overload.

Thanks for everything

Vnaster

 

Thu Apr 20 2017 12:30:40 EDT from bennabiy @ Uncensored Subject: Re: Server Relaying and Local delivery of Emails

Vnaster,

 

Often the best way to get the most current version is to use Easy Install method, rather than the packages in the repository. Often those packages in the repository are at the mercy of the time of those who have maintained them, and if I remember correctly, the Debian ones have not really been touched since 2015 at least.

 

IG could probably provide more info...

Thu Apr 20 2017 07:25:30 AM EDT from vnaster @ Uncensored Subject: Re: Server Relaying and Local delivery of Emails

Many Thanks IGgnatius!

Can we make small donation to Citadel? Is there an IBAN available, how is this possible?

You gave me a good lead i will try out what you have suggested. Scary as it may seem, to me as as accountant, I will try to host an email myself.

Possibly a custom MX record could do the trick and host not the primary emails, risking total oblivion, but a subdomain email.


By the way, I have noticed that my very very new test Citadel server has version 8.24 despite the fact that it was created three days ago..

REMARK/QUESTION: Don't we get the latest version of CITADEL by writing in Debian Terminal the following:

su

apt-get install citadel-mta

apt-get install citadel-suite

It there something in your repository probably that needs updating? Possibly wrong set of commands inputted?

I will check to see on your wiki to see how i update is made properly

Thanks again,

Vnaster

 

 

Wed Apr 19 2017 12:54:49 EDT from IGnatius T Foobar @ Uncensored Subject: Re: Server Relaying and Local delivery of Emails
The email had a From Field that was admin@citadel and thus couldn't be possibly replied to. Can this be fixed?  I tried  site-wide-configuration -> SMTP Servers -> Correct Forged From -> Only Change the From (...)  but no luck. Any idea how this is fixed?

Keep in mind that when you use a smart-host that requires authentication, very often the smart-host will rewrite the sender's email address to "what it's supposed to be".  Citadel itself will do this, if you use it as a smart-host.   Another example: if you use gmail as a smart-host, it'll rewrite the sender's email address, but not the display name.

If the message is going out from Citadel as "admin@citadel" then you need to set your fully-qualified domain name in the global system configuration, and then edit your account to have a proper email address in that domain.

 

Also any idea how I can receive and categorize emails in Citadel from remote POP3? Tried clicking Rooms -> Mail, then Advanced -> Edit (..) this Room -> Remote Retrieval, there i filled the host, user details, ect but no luck.. any idea how these details are filled properly?

You're in the correct place.  And the newest version of Citadel will try both POP3 and POP3S.  Maybe turn up your logging to "debug" and watch it try to fetch?

 

OPINION - Hosting Citadel on Raspberry pi: Good Idea (Easy to use for 10-emails-a-day , Scale-able, replaceable,) or Bad Idea (Potentially painfully slow and unworkable, SD card : doggy drive VS HDD ect, death trap ect.)

Lots of people do this.  It seems to work fine.  I'd suggest running it on a "real disk" (either HDD or SSD) rather than on an SD card, though.

 



 



 



 



 



[#] Mon Apr 24 2017 11:31:37 EDT from vnaster @ Uncensored

Subject: Re: Server Relaying and Local delivery of Emails

[Reply] [ReplyQuoted] [Headers] [Print]

Please note that filters/rules did not work for incoming emails via remote POP3.

At least I couldn't make it work. Any idea if i am if doing something wrong?

Hopefully a remote POP3 email script could be written.

Any idea where to start from? How to try, and where to look?

A script example could come in handy.

Thank you,

Vnaster

Sun Apr 23 2017 18:08:45 EDT from vnaster @ Uncensored Subject: Re: Server Relaying and Local delivery of Emails

Found this and seems really interesting:http://www.citadel.org/doku.php/faq:everydayuse:sieve#createaddarule

Does this apply to sent items too?  We are trying to save sent emails per room.

I suggest you add this to the FAQ too including in the title the world rule, so that everyone understands that the all functionality is there

Thanks,

Sun Apr 23 2017 15:51:55 EDT from vnaster @ Uncensored Subject: Re: Server Relaying and Local delivery of Emails

Dear Citadel Community,

Managed to install Citadel to the latest version on Trisquel (scraped Debian) following Easy-install instructions and not apt-get .

Also managed to download emails from remote POP3 using directions below.

However I still cannot understand some functions of Citadel after reading FAQ and would greatly appreciate further assistance.

REMARK/PROPOSAL: At the first try of Easyinstall, I was hitting my head against the wall, because I couldn't figure out what was wrong with it (had continuous errors) now working properly on my system. In the end I found your article referring to Debian/Ubuntu prerequisites and solved every problem. Perhaps you could move the Ubuntu/Debian prerequisites article on the FAQ Section since there are awful a lot of people using variants of these OS today.

QUESTION(1): How can we make a small donation to Citadel project?

QUESTION(2): Are there any scripts/rules like outlook for categorizing/moving emails between Rooms? I am asking because although remote POP3 download worked (see below) however it worked on a different folder than the default inbox folder (the one marked MAIL on My folders - POP3 download wouldn't work by no means in any version) on citadel. I was hoping to automatically move emails between rooms and avoid fragmented incoming emails which it is a recipe for Information Overload.

Thanks for everything

Vnaster

 

Thu Apr 20 2017 12:30:40 EDT from bennabiy @ Uncensored Subject: Re: Server Relaying and Local delivery of Emails

Vnaster,

 

Often the best way to get the most current version is to use Easy Install method, rather than the packages in the repository. Often those packages in the repository are at the mercy of the time of those who have maintained them, and if I remember correctly, the Debian ones have not really been touched since 2015 at least.

 

IG could probably provide more info...

Thu Apr 20 2017 07:25:30 AM EDT from vnaster @ Uncensored Subject: Re: Server Relaying and Local delivery of Emails

Many Thanks IGgnatius!

Can we make small donation to Citadel? Is there an IBAN available, how is this possible?

You gave me a good lead i will try out what you have suggested. Scary as it may seem, to me as as accountant, I will try to host an email myself.

Possibly a custom MX record could do the trick and host not the primary emails, risking total oblivion, but a subdomain email.


By the way, I have noticed that my very very new test Citadel server has version 8.24 despite the fact that it was created three days ago..

REMARK/QUESTION: Don't we get the latest version of CITADEL by writing in Debian Terminal the following:

su

apt-get install citadel-mta

apt-get install citadel-suite

It there something in your repository probably that needs updating? Possibly wrong set of commands inputted?

I will check to see on your wiki to see how i update is made properly

Thanks again,

Vnaster

 

 

Wed Apr 19 2017 12:54:49 EDT from IGnatius T Foobar @ Uncensored Subject: Re: Server Relaying and Local delivery of Emails
The email had a From Field that was admin@citadel and thus couldn't be possibly replied to. Can this be fixed?  I tried  site-wide-configuration -> SMTP Servers -> Correct Forged From -> Only Change the From (...)  but no luck. Any idea how this is fixed?

Keep in mind that when you use a smart-host that requires authentication, very often the smart-host will rewrite the sender's email address to "what it's supposed to be".  Citadel itself will do this, if you use it as a smart-host.   Another example: if you use gmail as a smart-host, it'll rewrite the sender's email address, but not the display name.

If the message is going out from Citadel as "admin@citadel" then you need to set your fully-qualified domain name in the global system configuration, and then edit your account to have a proper email address in that domain.

 

Also any idea how I can receive and categorize emails in Citadel from remote POP3? Tried clicking Rooms -> Mail, then Advanced -> Edit (..) this Room -> Remote Retrieval, there i filled the host, user details, ect but no luck.. any idea how these details are filled properly?

You're in the correct place.  And the newest version of Citadel will try both POP3 and POP3S.  Maybe turn up your logging to "debug" and watch it try to fetch?

 

OPINION - Hosting Citadel on Raspberry pi: Good Idea (Easy to use for 10-emails-a-day , Scale-able, replaceable,) or Bad Idea (Potentially painfully slow and unworkable, SD card : doggy drive VS HDD ect, death trap ect.)

Lots of people do this.  It seems to work fine.  I'd suggest running it on a "real disk" (either HDD or SSD) rather than on an SD card, though.

 



 



 



 



 



 



[#] Mon Apr 24 2017 15:30:53 EDT from Freakdog @ Dog Pound BBS II

Subject: Re: Minor issue with EasyInstall overwriting messages directory contents

[Reply] [ReplyQuoted] [Headers] [Print]

 

Sat Apr 22 2017 07:11:58 PM EDT from IGnatius T Foobar @ Uncensored Subject: Re: Minor issue with EasyInstall overwriting messages directory contents
Just a note...the last couple of EasyInstall based updates/upgrades
have clobbered my hello and goodbye files (as well as everything
else).

It happens on my system too and is a nuisance. Will look into it. 

Gracias!



[#] Mon Apr 24 2017 18:43:27 EDT from kinetix @ Uncensored

Subject: RSS over HTTPS

[Reply] [ReplyQuoted] [Headers] [Print]

Hi all,

I'm having a confusing issue with pulling an RSS feed in Citadel.  I have a version 903 setup installed.  I have received the following errors in Aide:

Error while RSS-Aggregation Run of https://www.reddit.com/r/videos/new/.rss 
need a 200, got a 301 ! 
Curl Error message: Citadel RSS Client / 
Redirect header points to: https://www.reddit.com/r/videos/new/.rss 
Response text was: 

There seems to be something weird in the libcitadel's URL handling code, so I thought maybe putting in the port number would help:

Error while RSS-Aggregation Run of https://www.reddit.com:443/r/videos/new/.rss 
need a 200, got a 0 ! 
Curl Error message: Empty reply from server / Server returned nothing (no headers, no data) 
Response text was: 

 

I don't have the issue when pulling via CURL itself - if I test with:

curl -v --user-agent "Mozilla/4.73 [en] (X11; U; Linux 2.2.15 i686)" https://www.reddit.com/r/videos/new/.rss

There seems to be no issue.

Any thoughts on whether this should work at all or not?



[#] Mon Apr 24 2017 18:49:27 EDT from kinetix @ Uncensored

Subject: Release notifications?

[Reply] [ReplyQuoted] [Headers] [Print]

Hi all,

Is there any place where new release notifications are posted?  The News page on the website (in the rolling release article) says to look at the Download page... the download page doesn't have current version information on it anywhere that I can see.  Sooo... how are we supposed to know when it's time to look at an update?

Thanks!



[#] Tue Apr 25 2017 12:41:24 EDT from AdeV @ Uncensored

Subject: Problem with TDAP

[Reply] [ReplyQuoted] [Headers] [Print]

Hello!

Hopefully someone can help me out with the issue I'm having with Citadel and The Dreaded Auto Purger...

The other day, I discovered that a rogue process on my Citadel server has sent over 1.2 million e-mails to "postmaster". These have gathered in the Aide folder on the Main Floor, accessible by the Administrator login. Clearly, this is A Bad Thing. In an effort to get rid of them, I set the expiry policy on the room to 1 day - this should get rid of all but a few thousand emails, the rest of which would disappear the following day. Except that's not what happened - instead, the Berkely DB blew up to fill the hard-drive, and killed the citadel server process.

 

After some head-scratching and a db_recover/db_archive, all was well again. Until TDAP kicked in once again and started going mental.

 

To try something out, I rolled a new (and very expensive VM) with 1.4TB of storage on it, installed Citadel, copied the 7G of citadel database files and fired it up.  It's been running for about 3 hours now, the database directory is up to 220GB and over 22,000 .log files.  Seems like something is waaay out of whack here, but what??

 

OK, I do have a couple of bad settings: Journaling of e-mails is ENABLED (but no e-mail address set), and full-text indexing is set. I've turned both off for the moment, but I guess because TDAP is already in session, they won't make any difference. Or maybe they'll make things worse...

 

In case it matters, I'm running Citadel 8.24, on Centos 7 with ext4 filesystem.

 

Thanks in advance!
Ade. 



[#] Wed Apr 26 2017 10:59:47 EDT from AdeV @ Uncensored

Subject: Re: Problem with TDAP

[Reply] [ReplyQuoted] [Headers] [Print]

Some additional notes...

 

I ran the process overnight on the BFO linux box. After about 8 hours, it maxed the 1.4TB storage and crashed out.

 

Earlier today, I tried another tactic - I set up a 2nd Citadel on another new VM (smaller one this time...) and used ctdlmigrate to transfer the database. This succeeded, but when I set TDAP off.... yep, the disk usage climbed inexorably upwards until it ran out of space again.

 

Short of trawling through 7gb of XML export.... is there anything I can do to get rid of these messages?

 

Cheers,

Ade.



[#] Wed Apr 26 2017 11:01:08 EDT from AdeV @ Uncensored

Subject: Re: Problem with TDAP

[Reply] [ReplyQuoted] [Headers] [Print]

Some additional notes...

 

I ran the process overnight on the BFO linux box. After about 8 hours, it maxed the 1.4TB storage and crashed out.

 

Earlier today, I tried another tactic - I set up a 2nd Citadel on another new VM (smaller one this time...) and used ctdlmigrate to transfer the database. This succeeded, but when I set TDAP off.... yep, the disk usage climbed inexorably upwards until it ran out of space again.

 

Short of trawling through 7gb of XML export.... is there anything I can do to get rid of these messages?

 

Cheers,

Ade.



[#] Wed Apr 26 2017 14:28:55 EDT from IGnatius T Foobar @ Uncensored

Subject: Re: Problem with TDAP

[Reply] [ReplyQuoted] [Headers] [Print]

AdeV: do you have your site configuration set to "Automatically delete committed database logs" ? If not, please turn on that option.

If it's the logs that are piling up, you will find them as /usr/local/citadel/data/log.********** and they will be 10 MB each. Be careful; you can't just delete them. If you have Citadel configured to delete them automatically, they will be deleted when they are no longer needed, in which case there should never be more than one or two of them on disk at any given time.

If it's not the logs that are piling up, please do a "ls -lh /usr/local/citadel/data" and we can see which file is the problem.

[#] Wed Apr 26 2017 18:34:05 EDT from kinetix @ Uncensored

Subject: Re: RSS over HTTPS

[Reply] [ReplyQuoted] [Headers] [Print]

Interesting... as a follow-up to the RSS https issue, I updated to libcit/citadel 911 and going back to the plain https URI without the port number in there, it just did a pull of the RSS feed successfully.

Thanks!



[#] Wed Apr 26 2017 18:40:08 EDT from kinetix @ Uncensored

Subject: citserver isn't paying attention to -x flag

[Reply] [ReplyQuoted] [Headers] [Print]

Running libcit/citserver 911 now.

citserver is run as: /home/citadel/citserver -d -h/home/citadel -x0 -llocal0

I've gone down to -x0 trying to get the logging to stop seeming like a full debug log, but no matter the setting it's spewing out every event that seems to happen on the system.  I would be happy to post any parts of the logs, if necessary.



[#] Wed Apr 26 2017 18:50:43 EDT from kinetix @ Uncensored

Subject: Re: citserver isn't paying attention to -x flag

[Reply] [ReplyQuoted] [Headers] [Print]

On a related note, webcit does syslogging but there's no way to configure the verbosity or facility?  Is it worthwhile just to use -t instead?



[#] Thu Apr 27 2017 00:23:11 EDT from AdeV @ Uncensored

Subject: Re: Problem with TDAP

[Reply] [ReplyQuoted] [Headers] [Print]

 

Wed Apr 26 2017 14:28:55 EDT from IGnatius T Foobar @ Uncensored Subject: Re: Problem with TDAP
AdeV: do you have your site configuration set to "Automatically delete committed database logs" ? If not, please turn on that option.

If it's the logs that are piling up, you will find them as /usr/local/citadel/data/log.********** and they will be 10 MB each. Be careful; you can't just delete them. If you have Citadel configured to delete them automatically, they will be deleted when they are no longer needed, in which case there should never be more than one or two of them on disk at any given time.

If it's not the logs that are piling up, please do a "ls -lh /usr/local/citadel/data" and we can see which file is the problem.

Hi,

I can confirm I do have the automatically delete committed database logs setting switched on. During normal operation, I only ever see one or two log files.

I discovered the hard way about not deleting the log files! Fortunately I had just taken a backup....

 

When TDAP starts, if I have set the message expire policy on the Aide folder, it is the log files which start piling up, eventually filling the hard disk completely. The cdb.0? files don't change size during the whole operation. After the disk space flatlines, running db_recover then db_archive piped into rm to get rid of the log files returns everything to the state prior to TDAP running. My guess is, TDAP starts a transaction, but either some minor corruption in my DB causes it to go round and round in circles, or it just plain can't handle 1.25 million messages in a room...

Cheers,

Ade. (not Aide...)



[#] Thu Apr 27 2017 05:05:49 EDT from vnaster @ Uncensored

Subject: Filtering Incoming remote POP3 emails

[Reply] [ReplyQuoted] [Headers] [Print]

Continuing my previous posts, any idea how to filter incoming remote POP3 messages in Citadel?

If not supported, maybe there is a sample script for moving emails that i could try adapting?

Thanks,

Vnaster

 

 



[#] Thu Apr 27 2017 11:06:03 EDT from "Dirk Heinrichs" <dirk.heinrichs@altum.de> to room_citadel_support@uncensored.citadel.org

Subject: Re: [Citadel Support] Re: Can't resolve admin account from AD

[Reply] [ReplyQuoted] [Headers] [Print]

Am 05.04.2017 um 19:44 schrieb Dirk Heinrichs:

... which leads to another compilation problem later, in the citadel
package. The problem here is that Stretch already ships OpenSSL 1.1,
which introduces API incompatible changes. So, in order to compile
Citadel on Stretch, it has to be adapted to OpenSSL 1.1 first.

Stretch is already in freeze phase. Is there anythin being done on that
front?

Thanks...

Dirk

--
Dirk Heinrichs <dirk.heinrichs@altum.de>
GPG Public Key: D01B367761B0F7CE6E6D81AAD5A2E54246986015
Sichere Internetkommunikation: http://www.retroshare.org
Privacy Handbuch: https://www.privacy-handbuch.de

signature.asc (application/pgp-signature, 849 bytes) [ View | Download ]
[#] Thu Apr 27 2017 17:41:37 EDT from kinetix @ Uncensored

Subject: webcit language selection bug

[Reply] [ReplyQuoted] [Headers] [Print]

Anyone noticed that there's some odd issues with the Language selector in webcit?  If you only have 1 language available, you see two selections for it in the drop-down.  If you have 2 available, there's still two "en_US"'s, and you might get a weird blank page by selecting one of them.  Or, you may get bounced to another room/URI you weren't expecting.

Something pretty funky going on there.



[#] Thu Apr 27 2017 17:50:05 EDT from bennabiy @ Uncensored

Subject: Re: webcit language selection bug

[Reply] [ReplyQuoted] [Headers] [Print]

I could be wrong, but I think one entry is showing you what you already have, and the other just is a choice for it, which once selected redirects you to your _BASEROOM_ set per user...

Thu Apr 27 2017 05:41:37 PM EDT from kinetix @ Uncensored Subject: webcit language selection bug

Anyone noticed that there's some odd issues with the Language selector in webcit?  If you only have 1 language available, you see two selections for it in the drop-down.  If you have 2 available, there's still two "en_US"'s, and you might get a weird blank page by selecting one of them.  Or, you may get bounced to another room/URI you weren't expecting.

Something pretty funky going on there.



 



[#] Thu Apr 27 2017 18:06:02 EDT from kinetix @ Uncensored

Subject: Enable "Reply-To:" on regular room messages?

[Reply] [ReplyQuoted] [Headers] [Print]

Howdy... is this a wacky idea?  If one wants to utilize citadel from a mobile device, it seems an IMAP client may be the way to go.  But, it's not so optimal when wanting to reply to messages in rooms when the system is treated like a forum/BBS.  If we could set a Reply-To: in a room for the messages contained in it (even as simply as an option "Set message Reply-To: to this room's email address?", then it would make participating from an IMAP client a little more bearable.

Would this break anything, or is it already implemented in another fashion that I haven't seen yet?

 



Go to page: First ... 99 100 101 102 [103] 104 105 106 107 ... Last