Language:
switch to room list switch to menu My folders
Go to page: First ... 49 50 51 52 [53] 54 55 56 57 ... Last
[#] Fri Apr 17 2015 16:06:35 EDT from jacksgt @ Uncensored

Subject: Per User Relay

[Reply] [ReplyQuoted] [Headers] [Print]

Is "per User Relay" still a feature to be implemented?

http://www.citadel.org/doku.php/faq:installation:relay

> Configuring per user Relay

> this is an unrleased feature - it will be part of citadel 8.2x

I'm using version 8.24 (according to APT). How can I check if my version supports this feature?

 

BTW: there is a small typo in "unreleased" (you wrote "unrelased") :-)



[#] Sat Apr 18 2015 03:01:25 EDT from quiricada @ Uncensored

Subject: ctdlmigrate

[Reply] [ReplyQuoted] [Headers] [Print]

hi,

am trying to migrate and it's not working?

here's part of the terminal output:

=====================================

Remote commands are executing successfully.


Locating the remote 'sendcommand' and Citadel installation...
sendcommand: started (pid=29815) connecting to Citadel server at /usr/local/citadel/citadel-admin.socket
200 abc Citadel server ADMIN CONNECTION ready.
NOOP
200 ok
sendcommand: processing ended.

ctdlmigrate will now begin a database migration...
sendcommand: started (pid=665) connecting to Citadel server at /var/run/citadel/citadel-admin.socket
200 panda Citadel server ADMIN CONNECTION ready.
MIGR import
400 sock it to me
sendcommand: usage: sendcommand [-h server_dir] [-w watchdog_timeout]
sendcommand: processing ended.
sendcommand: started (pid=29817) connecting to Citadel server at /usr/local/citadel/citadel-admin.socket
200 abc Citadel server ADMIN CONNECTION ready.
MIGR listdirs
100 Don't forget these:
sendcommand: processing ended.
rsync -va --rsh='ssh -S /tmp/ctdl.028b.579478fe' root@192.168.1.28:/usr/local/citadel/bio// /var/lib/citadel/bio//
receiving incremental file list

sent 11 bytes  received 31 bytes  84.00 bytes/sec
total size is 0  speedup is 0.00
rsync -va --rsh='ssh -S /tmp/ctdl.028b.579478fe' root@192.168.1.28:/usr/local/citadel/files// /var/lib/citadel/files//
receiving incremental file list

sent 13 bytes  received 204 bytes  434.00 bytes/sec
total size is 599,386  speedup is 2,762.15
rsync -va --rsh='ssh -S /tmp/ctdl.028b.579478fe' root@192.168.1.28:/usr/local/citadel/userpics// /var/lib/citadel/userpics//
receiving incremental file list

sent 11 bytes  received 31 bytes  84.00 bytes/sec
total size is 0  speedup is 0.00
rsync -va --rsh='ssh -S /tmp/ctdl.028b.579478fe' root@192.168.1.28:/usr/local/citadel/messages// /etc/citadel/messages//
receiving incremental file list

sent 11 bytes  received 216 bytes  454.00 bytes/sec
total size is 5,114  speedup is 22.53
rsync -va --rsh='ssh -S /tmp/ctdl.028b.579478fe' root@192.168.1.28:/usr/local/citadel/netconfigs// /etc/citadel/netconfigs//
receiving incremental file list

sent 11 bytes  received 51 bytes  124.00 bytes/sec
total size is 0  speedup is 0.00
rsync -va --rsh='ssh -S /tmp/ctdl.028b.579478fe' root@192.168.1.28:/usr/local/citadel/keys/ /etc/ssl/citadel//
receiving incremental file list

sent 11 bytes  received 68 bytes  158.00 bytes/sec
total size is 2,207  speedup is 27.94
rsync -va --rsh='ssh -S /tmp/ctdl.028b.579478fe' root@192.168.1.28:/usr/local/citadel/images// /var/lib/citadel/images//
receiving incremental file list

sent 11 bytes  received 49 bytes  120.00 bytes/sec
total size is 2,288  speedup is 38.13
rsync -va --rsh='ssh -S /tmp/ctdl.028b.579478fe' root@192.168.1.28:/usr/local/citadel/info// /var/lib/citadel/info//
receiving incremental file list

sent 11 bytes  received 31 bytes  84.00 bytes/sec
total size is 0  speedup is 0.00


 *** Citadel migration was successful! ***


Shutting down the socket connection...

=====================================

 

seems like it didn't copy anything.

what am i doing wrong?

 

thanks

 

source:

Linux panda 2.6.32-54-generic-pae #116-Ubuntu SMP Tue Nov 12 19:42:36 UTC 2013 i686 GNU/Linux

Distributor ID: Ubuntu
Description:    Ubuntu 10.04.4 LTS
Release:        10.04
Codename:       lucid

target:

Linux sss 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01) x86_64 GNU/Linux
Distributor ID:    Debian
Description:    Debian GNU/Linux 8.0 (jessie)
Release:    8.0
Codename:    jessie



[#] Mon Apr 20 2015 07:01:59 EDT from dothebart @ Uncensored

Subject: Re: Per User Relay

[Reply] [ReplyQuoted] [Headers] [Print]

 

Fri Apr 17 2015 16:06:35 EDT from jacksgt @ Uncensored Subject: Per User Relay

Is "per User Relay" still a feature to be implemented?

http://www.citadel.org/doku.php/faq:installation:relay

> Configuring per user Relay

> this is an unrleased feature - it will be part of citadel 8.2x

I'm using version 8.24 (according to APT). How can I check if my version supports this feature?

 

BTW: there is a small typo in "unreleased" (you wrote "unrelased") :-)



Its implemented.

However, its not all that easy to use.

The Author of the message is used to match a relay URL in the smarthost configs.

you configure it

authuser:password@smarthost matchAuthor

Watch your syslog with enabled smtp debug logging for the appropriate choices.



[#] Mon Apr 20 2015 07:03:41 EDT from dothebart @ Uncensored

Subject: Re: ctdlmigrate

[Reply] [ReplyQuoted] [Headers] [Print]

You should make shure both sides run the same citadel version.



[#] Mon Apr 20 2015 15:09:39 EDT from Currerius @ Uncensored

Subject: Re: user is not accepted as valid rcpt_to address

[Reply] [ReplyQuoted] [Headers] [Print]

Thank you for confirming this. I think I got your workaround, but as I said I probably will simply allow people to sign up themselves. Everything is working now. SMTP on port 25, SMTPS on 465, MSA on 587, IMAPS on 993 - and this means the COMODO PostiveSSL issue which bothered one of the posters does also work.

Now I will look for someone who can teak the CSS  a bit after my liking.

Excellent, you really created and maintain something very beautiful, thanks a ton...

Thu Apr 16 2015 18:18:28 EDT from dothebart @ Uncensored Subject: Re: user is not accepted as valid rcpt_to address

Hm, now this is somewhat crazy.

I was able to reproduce it as you did. vcard editing didn't change unless I added a regular mail alias.

then I removed the user, and ran sendcommand TDAP

so it would be gone and I could reusie it.

After that all users created immediately could receive mail.

I specified a password in the dialog.

 

Thu Apr 16 2015 11:48:28 EDT from Currerius @ Uncensored Subject: Re: user is not accepted as valid rcpt_to address

Thanks Lauri for pointing that out.

I indeed intent to use citadel with SES - it should be possible with Citadels relaying function which works with AUTH PLAIN (and so does SES) - I gave it a shot and it did not work. I will debug it at a later point in time. Just to mention it: The other possibility is setting up stunnel on say port 10025 (in Ubuntu/Debian: "aptitude install stunnel4") and relay outgoing mail through localhost:10025, then stunnel manages the TLS termination and authentication against SES. This works with Citadel.

Note that my problem with the mail users is *incoming*. That is, if the admin user creates a Citadel account the user is rejected by the Citadel SMTP demon as valid user.

When I create the user directly in WebCit then everything is fine. For now I simply create the users in WebCit (not many) and in the future it might be my default that I simply relay selected users to the WebCit interface where they can setup their account themselves.

Thank you guys for all the work you put into amazing Citadel - I really like it.

Best regards,

Renard

 

Tue Apr 14 2015 19:13:54 EDT from Lauri Ojansivu @ Uncensored Subject: Re: user is not accepted as valid rcpt_to address

Hi,

EC2 has limits on sending email.

On page http://aws.amazon.com/ec2/faqs/

"Q: Are there any limitations in sending email from EC2 instances?
Yes. In order to maintain the quality of EC2 addresses for sending email, we enforce default limits on the amount of email that can be sent from EC2 accounts. If you wish to send larger amounts of email from EC2, you can apply to have these limits removed from your account by filling out this form."

Because spot-instances are usually temporary, options to get it working would be:

  1. Attach Elastic IP to Spot Instance, so you can keep same IP-address even when changing EC2 instances, you can change Elastic IP to point to another Spot Instance if needed.
  2. Use AWS SES for sending email ( I have not tested this with Citadel. )
  3. Use for example SendGrid's free quota to send email, https://sendgrid.com/docs/User_Guide/sending_practices.html . ( I have not tested this with Citadel. )

BR,
Lauri 

 

Mon Apr 06 2015 15:24:18 EDT from Currerius @ Uncensored Subject: user is not accepted as valid rcpt_to address

Dear Citadel community,

I created a new user and added his credentials in my webcit administrative account (checking the "Permission to send internet mail"). The default Access Level was 4 "network user" i even raised it to 5 "preferred user" and restarted the citadel-server.

But the user name is rejected at SMTP rcpt to time as "unknown user" error code 550.

The admin user can receive email.

This is now my x-th citadel install on EC2 spot-instances. I am very sure that the secondary test user I installed was able to both send and receive email before.

 

What am I missing?

Kind regards,

Renard



 



 



 



 



[#] Wed Apr 22 2015 05:25:05 EDT from CCIGadmin @ Uncensored

Subject: CCIG Malaysia: our email labelled as spam

[Reply] [ReplyQuoted] [Headers] [Print]

Hi,

We are currently using Citadel 7.71 since 2012.

Lately, every email sent from our domain will be directed to receiver's Spam folder.

Is there any settings in our web-mail administrative site to fix the problem.

Or if there's any solution/tutorial regarding this matter, kindly advise.

Thank you.

 

Mr. Soffie
CCIG Malaysia
soffie@ccigmalaysia.com

 



[#] Wed Apr 22 2015 05:50:07 EDT from dothebart @ Uncensored

Subject: Re: CCIG Malaysia: our email labelled as spam

[Reply] [ReplyQuoted] [Headers] [Print]

 

Wed Apr 22 2015 05:25:05 EDT from CCIGadmin @ Uncensored Subject: CCIG Malaysia: our email labelled as spam

Hi,

We are currently using Citadel 7.71 since 2012.

Lately, every email sent from our domain will be directed to receiver's Spam folder.

Is there any settings in our web-mail administrative site to fix the problem.

Or if there's any solution/tutorial regarding this matter, kindly advise.

Thank you.

 

Mr. Soffie
CCIG Malaysia
soffie@ccigmalaysia.com

 



Please upgrade to the most recent version of citadel.

There has ben a lot of changes to improve email sending via SMTP and RFC conformity so your mails gain less spam points.



[#] Wed Apr 22 2015 07:07:29 EDT from CCIGadmin @ Uncensored

Subject: Re: CCIG Malaysia: our email labelled as spam

[Reply] [ReplyQuoted] [Headers] [Print]

Thanks for your respond.

Kindly advise on how to update for the latest version.

Thank you.

Mr. Soffie



[#] Wed Apr 22 2015 07:53:57 EDT from dothebart @ Uncensored

Subject: Re: CCIG Malaysia: our email labelled as spam

[Reply] [ReplyQuoted] [Headers] [Print]

That depends on your means of installing the old version in first place.

re-run easyinstall if you did,

on a Debian upgrade your machine to jessie,

...



[#] Wed Apr 22 2015 09:45:28 EDT from vishalanm @ Uncensored

Subject: citserver crashes

[Reply] [ReplyQuoted] [Headers] [Print]


hi

 

new to citadel mail solution, need to support the server on-site

error in /var/log/messages

unable to allocate space from the buffer cache

cdb_fetch (2) unable to allocate memory

 

help wanted



[#] Wed Apr 22 2015 09:49:05 EDT from dothebart @ Uncensored

Subject: Re: citserver crashes

[Reply] [ReplyQuoted] [Headers] [Print]

have a look at:

https://community.oracle.com/thread/573812

you can configure the db backend like noted here:

http://citadel.org/doku.php/faq:systemadmin:how_may_i_improve



[#] Wed Apr 22 2015 10:51:12 EDT from paliasp @ Uncensored

Subject: mail not delivered

[Reply] [ReplyQuoted] [Headers] [Print]

Hello,

I have issues sending mails to yahoo, while sending to gmail works fine (same mail, sending to both addresses)

I am attaching the logs I could find with changed usernames, in case someone might have an idea.

Regards,

Panos

ps. I tried registering the mailing list, but it won't send me the confirmation mail in gmail :(



citadel.log (text/x-log, 8507 bytes) [ View | Download ]
[#] Wed Apr 22 2015 11:27:30 EDT from vishalanm @ Uncensored

Subject: Re: citserver crashes

[Reply] [ReplyQuoted] [Headers] [Print]


Hi

 

db configured as per the recommendation.

need to know how to increase the default memory allocated to the db

 



[#] Wed Apr 22 2015 20:37:36 EDT from TaMeR @ Uncensored to citadel_support@citadel.org

Subject: Is there RFC5256 support in citadel?

[Reply] [ReplyQuoted] [Headers] [Print]

Couldn't find anything at citadel.doc


The SORT and THREAD extensions to the [IMAP] protocol provide a means of
server-based sorting and threading of messages, without requiring that
the client download the necessary data to do so itself.

http://tools.ietf.org/html/rfc5256

[#] Wed Apr 22 2015 20:41:58 EDT from TaMeR @ Uncensored to dothebart <dothebart@uncensored.citadel.org>, citadel_support@citadel.org

Subject: Re: citserver crashes

[Reply] [ReplyQuoted] [Headers] [Print]

On 04/22/2015 04:49 PM, dothebart wrote:
have a look at:

https://community.oracle.com/thread/573812

you can configure the db backend like noted here:

http://citadel.org/doku.php/faq:systemadmin:how_may_i_improve



How do you do that dothebart ???
How do you keep track of these links based on possible FAQs?

[#] Thu Apr 23 2015 05:17:03 EDT from dothebart @ Uncensored

Subject: Re: mail not delivered

[Reply] [ReplyQuoted] [Headers] [Print]

please enable 'smtpeventclient' logging in webcit and send the results of another attempt.

ps: you should change the passvoid of that account now.



[#] Thu Apr 23 2015 06:51:43 EDT from TaMeR @ Uncensored to citadel_support@citadel.org

Subject: Re: Is there RFC5256 support in citadel?

[Reply] [ReplyQuoted] [Headers] [Print]

Answering my own question.

Sending IMAP request "UID THREAD" returns an error.
So there is no thread request build in.

[#] Thu Apr 23 2015 09:02:33 EDT from mail" via citadel being sent as binary attachments @ Dog Pound BBS II

Subject: "cat <text file>

[Reply] [ReplyQuoted] [Headers] [Print]

I'm running into something that I find odd.

I'm running "Lynis" on my servers, at home.

At the end of the daily job (run via a script in /etc/cron.daily), it runs:

(/usr/local/lynis/lynis -c --cronjob > /var/log/lynis.log 2>&1
cat /var/log/lynis.log | mail -s "Daily Lynis Scan Report" <someone@somewhere)

The only mailer daemon on this system is Citadel

The lynis.log is a text file, but when it is emailed from my Citadel system to my other server, it comes across as a binary attachment. I've tested this manually, as well. Meanwhile emailing myself some other text file like, say, the hosts file, comes through as text when I run the same 'cat <file> | mail -s "some subject" <someone@somewhere>' command.

Needless to say, I'm a bit perplexed...is this known/expected behavior?



[#] Thu Apr 23 2015 10:36:24 EDT from paliasp @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

I enabled it. http://pastebin.com/raw.php?i=kLSH9LNJ ps: What does that mean?

[#] Thu Apr 23 2015 11:04:23 EDT from s3cr3to @ Uncensored

Subject: Old citadel/easyinstall with stuck mails ¿how to runqueue?

[Reply] [ReplyQuoted] [Headers] [Print]

I have an old Citadel version installed with the easyinstall in debian squeeze

WebCit 7.86, server build 33e4f20515571323671401780956558c414094f8

 

I have a load of mails that where not sent because the target/server was down (a virtual citadel repository) now is up again but if I try:

sendcommand SMTP runqueue
-bash: sendcommand: command not found

I wonder why sendcommand doesn't exists here... ¿is an external tool?

Exists some way to make the queue to run? maybe restarting citadel service (but I prefer to I ask first)

Regards



Go to page: First ... 49 50 51 52 [53] 54 55 56 57 ... Last