Language:
switch to room list switch to menu My folders
Go to page: First ... 32 33 34 35 [36] 37 38 39 40 ... Last
[#] Sat Jan 17 2015 18:46:03 EST from richardb49 @ Uncensored

Subject: Error on upgrade

[Reply] [ReplyQuoted] [Headers] [Print]

I tried to do an upgrade to 7.83-2 on a Debian system. It crashed and said to run dpkg --configure -a to fix it. dpkg gives me an error line:

test: 24: illegal number: 7832squeeze2

and then things go downhill from there.  I tried removing it and installing it again, but I get the same erros. What do I do to get it back up before Monday AM?



[#] Sat Jan 17 2015 19:01:46 EST from TaMeR @ Uncensored

Subject: Re: Error on upgrade

[Reply] [ReplyQuoted] [Headers] [Print]

 

Sat Jan 17 2015 18:46:03 EST from richardb49 @ Uncensored Subject: Error on upgrade

I tried to do an upgrade to 7.83-2 on a Debian system. It crashed and said to run dpkg --configure -a to fix it. dpkg gives me an error line:

test: 24: illegal number: 7832squeeze2

and then things go downhill from there.  I tried removing it and installing it again, but I get the same erros. What do I do to get it back up before Monday AM?




Try

dpkg --force-remove-reinstreq 

see 'dpkg --force-help' for more info

-- 
TaMeR

Citadel Sync:
https://bitbucket.org/gotamer/citadel/wiki/CitadelSync

Citadel Go Library:
https://bitbucket.org/gotamer/citadel

Citadel PHP:
https://bitbucket.org/robotamer/citadelphp



[#] Sat Jan 17 2015 19:36:35 EST from richardb49 @ Uncensored

Subject: Re: Error on upgrade

[Reply] [ReplyQuoted] [Headers] [Print]

I was looing at the --force when you replied. I tried that command but it gives an error message: need action option.

I looked at dpkg --force-help and your command seems valid; I do not understand action option.



[#] Sat Jan 17 2015 19:42:29 EST from TaMeR @ Uncensored

Subject: Re: Error on upgrade

[Reply] [ReplyQuoted] [Headers] [Print]

 

Sat Jan 17 2015 19:36:35 EST from richardb49 @ Uncensored Subject: Re: Error on upgrade

I was looing at the --force when you replied. I tried that command but it gives an error message: need action option.

I looked at dpkg --force-help and your command seems valid; I do not understand action option.



 

Sorry just add an -i or --install to the end

-- 
TaMeR



[#] Sun Jan 18 2015 06:31:49 EST from dothebart @ Uncensored

Subject: Re: Error on upgrade

[Reply] [ReplyQuoted] [Headers] [Print]

try to run citserver as root from the commandline and post whats happening.

you should however backup

/var/lib/citadel and /etc/citadel

 



[#] Sun Jan 18 2015 20:14:31 EST from IGnatius T Foobar @ Uncensored

Subject: Re: ClearOS LDAPS

[Reply] [ReplyQuoted] [Headers] [Print]

I've setup Ubuntu with Citadel, but I can't seem to actually get
Citadel to talk to the clear LDAPS service. I've seen rumbles that

We've started reworking the code to point to an LDAP URL instead of just a host and port, but the configuration system is not quite there yet. If you're comfortable building the Citadel system from source code, you could get this feature ahead of everyone else by downloading git master and editing ldap.c at line 40, change ldap:// to ldaps://

So you're definitely not the only person requesting this feature, and we do have it in the works.

[#] Sun Jan 18 2015 21:46:44 EST from richardb49 @ Uncensored

Subject: Webcit login failure and firefox

[Reply] [ReplyQuoted] [Headers] [Print]

I have used Firefox over Window Explorer for some time. But recently, I cannot log in to Webcit with Firefox but I can with Explorer. The web page lets me enter in my user name and password, but the javascript does not execute when I click on LogIn (try_username_and_password();). Thinking it was Citadel (foolish me), I reinstalled Citadel by doing an easyinstall. Nothing changed - same problem. By the way, Thunderbird still works fine with Citadel. I can send and receive emails with it. I just wanted to be able to check emails when I am not at my base computer. I am running Firefox 35.0. Any ideas?



[#] Sun Jan 18 2015 21:48:44 EST from richardb49 @ Uncensored

Subject: Re: Webcit login failure and firefox

[Reply] [ReplyQuoted] [Headers] [Print]

By the way, I am running Citadel 8.24 with WebCit 8.17, server build 8.24



[#] Sun Jan 18 2015 23:14:04 EST from M @ Uncensored

Subject: Re: ClearOS LDAPS

[Reply] [ReplyQuoted] [Headers] [Print]

 

Sun Jan 18 2015 20:14:31 EST from IGnatius T Foobar @ Uncensored Subject: Re: ClearOS LDAPS
We've started reworking the code to point to an LDAP URL instead of just a host and port, but the configuration system is not quite there yet. If you're comfortable building the Citadel system from source code, you could get this feature ahead of everyone else by downloading git master and editing ldap.c at line 40, change ldap:// to ldaps://

So you're definitely not the only person requesting this feature, and we do have it in the works.

Great news. Is there a release roadmap you're aiming to include the LDAPS feature in? Maybe I'll consider just running with ClearOS's native solution until you guys are stable with it. Thank you for the insight!



[#] Mon Jan 19 2015 01:01:58 EST from Chuck Norris @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

I keep getting Address family not supported by protocol every time I try to send a message.

Can someone help me? I port forwarded all the ports on my modem & restart my entire machine. I am running an Apache server on the same machine aswell.



[#] Mon Jan 19 2015 13:56:15 EST from TaMeR @ Uncensored

Subject: Address family not supported by protocol

[Reply] [ReplyQuoted] [Headers] [Print]

 

Mon Jan 19 2015 01:01:58 EST from Chuck Norris @ Uncensored

I keep getting Address family not supported by protocol every time I try to send a message.

Can someone help me? I port forwarded all the ports on my modem & restart my entire machine. I am running an Apache server on the same machine aswell.



 

I am not a citadel coder but, sounds like a problem with your socket.

Send us the log created when citadel is starting up.

-- 
TaMeR



[#] Mon Jan 19 2015 15:35:56 EST from dothebart @ Uncensored

Subject: Re: Address family not supported by protocol

[Reply] [ReplyQuoted] [Headers] [Print]

Most probaby your system has no ipv6, and citadel tries to broadcast bind by default to have all.

use setup to configure 0.0.0.0



[#] Mon Jan 19 2015 17:30:14 EST from the_mgt @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

 

Sat Jan 17 2015 18:27:29 EST from M @ Uncensored

Set the Ubuntu server up as an ldap client to authenticate via PAM to the ClearOS domain controller. Thats a solid idea, is there any specific Citadel documentation I should look at? 



So far, I have done this on one system, by following a general nslcd guide. There are a few selinux caveats if you do that on a RHEL based distro, but it is as straightforward as any obscure punching of config files on linux can be. And it involves about 5 config files :D

I used this as a guideline and used the interwebs via searchengines to troubleshoot stuff: http://arthurdejong.org/nss-pam-ldapd/setup



[#] Mon Jan 19 2015 23:34:49 EST from Chuck Norris @ Uncensored

Subject: Re: Address family not supported by protocol

[Reply] [ReplyQuoted] [Headers] [Print]

 

Mon Jan 19 2015 15:35:56 EST from dothebart @ Uncensored Subject: Re: Address family not supported by protocol

Most probaby your system has no ipv6, and citadel tries to broadcast bind by default to have all.

use setup to configure 0.0.0.0



Didn't fix it



[#] Tue Jan 20 2015 10:28:35 EST from dothebart @ Uncensored

Subject: Re: Address family not supported by protocol

[Reply] [ReplyQuoted] [Headers] [Print]

 

Mon Jan 19 2015 23:34:49 EST from Chuck Norris @ Uncensored Subject: Re: Address family not supported by protocol

 

Mon Jan 19 2015 15:35:56 EST from dothebart @ Uncensored Subject: Re: Address family not supported by protocol

Most probaby your system has no ipv6, and citadel tries to broadcast bind by default to have all.

use setup to configure 0.0.0.0



Didn't fix it



whats your

 

 /sbin/ifconfig
eth0      Link encap:Ethernet  HWaddr 00:1f:d0:88:b5:81 
          inet addr:192.168.1.1  Bcast:192.168.173.255  Mask:255.255.255.0
          inet6 addr: fe80::21f:d0ff:fe88:b581/64 Scope:Link

something similar?



[#] Wed Jan 21 2015 05:03:13 EST from lumiette @ Uncensored

Subject: How do I start Citadel?

[Reply] [ReplyQuoted] [Headers] [Print]

Hello!

I've installed it on my Manjaro system via yaourt, but I honestly have no clue what to do now. I can't find it anywhere, despite it having been successfully installed -- although webcit fails

==> Entering fakeroot environment...
==> Starting package()...
cp: cannot stat ‘/tmp/yaourt-tmp-user/aur-webcit/webcit.service’: No such file or directory
==> ERROR: A failure occurred in package().
    Aborting...
==> ERROR: Makepkg was unable to build webcit.
==> Restart building webcit ? [y/N]
==> -------------------------------

What should I do?



[#] Wed Jan 21 2015 05:21:04 EST from dothebart @ Uncensored

Subject: Re: How do I start Citadel?

[Reply] [ReplyQuoted] [Headers] [Print]

 

Wed Jan 21 2015 05:03:13 EST from lumiette @ Uncensored Subject: How do I start Citadel?

Hello!

I've installed it on my Manjaro system via yaourt, but I honestly have no clue what to do now. I can't find it anywhere, despite it having been successfully installed -- although webcit fails

==> Entering fakeroot environment...
==> Starting package()...
cp: cannot stat ‘/tmp/yaourt-tmp-user/aur-webcit/webcit.service’: No such file or directory
==> ERROR: A failure occurred in package().
    Aborting...
==> ERROR: Makepkg was unable to build webcit.
==> Restart building webcit ? [y/N]
==> -------------------------------

What should I do?



I'm sorry I have no clue at all what the arch yaourt does inside. Whatever it tries in there, you will have to come with a little more detail, else I won't be able to help.



[#] Thu Jan 22 2015 04:40:43 EST from citadel4dje @ Uncensored

Subject: Hostname and FQDN and Citadel

[Reply] [ReplyQuoted] [Headers] [Print]

I'm wanting to use your nice system. Using Debian 7 Srv. Been looking for a guide on how to setup the Hostname and the FQDN...but I haven't had any success so far :(

Im going to have it host mail for several Domains

Eg.

Domain1.com
Domain2.com
Domain3.com
...etc

How do I configure this in the Hosts?
and which hostname do I choose? does it matter which hostname I choose?

 



[#] Thu Jan 22 2015 06:20:34 EST from TaMeR @ Uncensored

Subject: Re: Hostname and FQDN and Citadel

[Reply] [ReplyQuoted] [Headers] [Print]

 

Thu Jan 22 2015 04:40:43 EST from citadel4dje @ Uncensored Subject: Hostname and FQDN and Citadel

I'm wanting to use your nice system. Using Debian 7 Srv. Been looking for a guide on how to setup the Hostname and the FQDN...but I haven't had any success so far :(

Im going to have it host mail for several Domains

Eg.

Domain1.com
Domain2.com
Domain3.com
...etc

How do I configure this in the Hosts?
and which hostname do I choose? does it matter which hostname I choose?

 



 

Sir, With All Due Respect.

We here gladly help people with technical problems.

However, a mail server is not a word processor on you local computer.

Based on your questions, I suggest you start with learning about domain names, DNS servers, etc. first.

This may sound harsh but it is with your best interest in mind.

If your interest is just having a personal mail server then you may be just better off renting a managed one.
Anybody here will gladly help you out with that, and since most of us are here because we just like this technology, I wouldn't be surprised if you could get this done for the cost of a dinner or so.

Best regards,

-- 

TaMeR

Citadel Sync:
https://bitbucket.org/gotamer/citadel/wiki/CitadelSync

Citadel Go Library:
https://bitbucket.org/gotamer/citadel

Citadel PHP:
https://bitbucket.org/robotamer/citadelphp



[#] Thu Jan 22 2015 12:17:25 EST from dothebart @ Uncensored

Subject: Re: Hostname and FQDN and Citadel

[Reply] [ReplyQuoted] [Headers] [Print]

 

Thu Jan 22 2015 06:20:34 EST from TaMeR @ Uncensored Subject: Re: Hostname and FQDN and Citadel

 

Thu Jan 22 2015 04:40:43 EST from citadel4dje @ Uncensored Subject: Hostname and FQDN and Citadel

I'm wanting to use your nice system. Using Debian 7 Srv. Been looking for a guide on how to setup the Hostname and the FQDN...but I haven't had any success so far :(

Im going to have it host mail for several Domains

Eg.

Domain1.com
Domain2.com
Domain3.com
...etc

How do I configure this in the Hosts?
and which hostname do I choose? does it matter which hostname I choose?

 



 

Sir, With All Due Respect.

We here gladly help people with technical problems.

However, a mail server is not a word processor on you local computer.

Based on your questions, I suggest you start with learning about domain names, DNS servers, etc. first.

This may sound harsh but it is with your best interest in mind.

If your interest is just having a personal mail server then you may be just better off renting a managed one.
Anybody here will gladly help you out with that, and since most of us are here because we just like this technology, I wouldn't be surprised if you could get this done for the cost of a dinner or so.

Best regards,

-- 

TaMeR

Citadel Sync:
https://bitbucket.org/gotamer/citadel/wiki/CitadelSync

Citadel Go Library:
https://bitbucket.org/gotamer/citadel

Citadel PHP:
https://bitbucket.org/robotamer/citadelphp



However, we have

http://citadel.org/doku.php/faq:spam:i_want_to_be_a_whitehead

as a starting point.



Go to page: First ... 32 33 34 35 [36] 37 38 39 40 ... Last