Language:
switch to room list switch to menu My folders
Go to page: First ... 18 19 20 21 [22] 23 24 25 26 ... Last
[#] Fri Sep 05 2014 12:14:02 EDT from platonov @ Uncensored

Subject: Re: How to compress the database?

[Reply] [ReplyQuoted] [Headers] [Print]

 

Fri Sep 05 2014 03:59:23 EDT from dothebart @ Uncensored Subject: Re: How to compress the database?

 

Thu Sep 04 2014 23:00:45 EDT from platonov @ Uncensored Subject: Re: How to compress the database?

 

Thu Sep 04 2014 22:53:47 EDT from IGnatius T Foobar @ Uncensored Subject: Re: How to compress the database?
You definitely have to stop the Citadel server before running database_cleanup.sh

Now I know!

I hope I can recover...

It would be great if your message would be displayed as the 1st line when you run database_cleanup.sh.

But, hey, NOTHING is perfect, right?

:)

its a very good side note. it should issue sendcommand down.

For some reason "sudo ./sendcommand down" when executed from /usr/local/citadel dir does not stop the server. I noticed before that /etc/init.d/citadel stop did not actually stop the server. What could be the reason for it?

(I am running Ubuntu 14.04. Citadel installed via easyinstall).

 



[#] Fri Sep 05 2014 14:48:06 EDT from jame @ Rocasa Mail System

Subject: Re: BinkD, fidonet?

[Reply] [ReplyQuoted] [Headers] [Print]

 

Thu Sep 04 2014 14:31:22 EDT from wduchene @ Uncensored Subject: BinkD, fidonet?

I've been Googling quite a bit, and can't seem to find any solution - but is there a work around, howto, or means of exchanging messages between something like binkd and citadel? I'd like to try out citadel with fidonet and am stopped short at the message conversion.

I also am interested in that (It was one of the reasons I decided to start using citadel) and conversion between the two is indeed what needs to done.  The possible interface via NNTP bring some possibilities if/when that becomes available. In the mean time I'd thought to try using ifmail/iftoss (from ifgate, which is in Debian) but I've had need to investigate other issues so haven't had a chance yet.

 

 



[#] Sat Sep 06 2014 09:33:08 EDT from danielhz @ Uncensored

Subject: Re: Charset tag in the Webcity interface

[Reply] [ReplyQuoted] [Headers] [Print]

 

Thu Sep 04 2014 17:16:49 EDT from dothebart @ Uncensored Subject: Re: Charset tag in the Webcity interface

 

Thu Sep 04 2014 14:24:41 EDT from danielhz @ Uncensored Subject: Charset tag in the Webcity interface

Hello all,

I started using Citadel as an organizer for myself a few days ago. However, I miss the tag

<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />

in the web interface. As I write in Spanish with UTF-8, I change manually the browser default charset to see the non ASCII characters that are necessary  in Spanish. I suppose I could update some HTML files in /usr/share/citadel-webcit/static to include the charset tag, but I am not sure if it is the best way to customize Webcity. Maybe it is a customization option that I do not found yet in the documentation. Is there?

Best,

Daniel Hernández



I can see your umlauts over here without problems ;-)

Seriously, the html thing is not the only place to look for encoding information.

Webcit puts it into the HTTP headers:

 

 
Content-Type  : text/html; charset=UTF-8

 



Thanks, I see that my server does not send that HTTP header. It could be that my server uses WebCit 8.14 and this sever is running WebCit 8.29?



[#] Sat Sep 06 2014 11:12:30 EDT from markc @ Uncensored

Subject: Citadel on Ubuntu Utopic

[Reply] [ReplyQuoted] [Headers] [Print]

Hi, I am wondering if anyone else here has tried to install the citadel 8.24 packages on k/ubuntu 14.10?

The client and webcit installed but the server fails without any indication why. I am wondering if I should persist and try to figure out why it's not installing or am I pushing it my trying to install on a pre-release of Ubuntu?



[#] Mon Sep 08 2014 08:11:01 EDT from dothebart @ Uncensored

Subject: Re: Charset tag in the Webcity interface

[Reply] [ReplyQuoted] [Headers] [Print]

 

Sat Sep 06 2014 09:33:08 EDT from danielhz @ Uncensored Subject: Re: Charset tag in the Webcity interface

 

Thu Sep 04 2014 17:16:49 EDT from dothebart @ Uncensored Subject: Re: Charset tag in the Webcity interface

 

Thu Sep 04 2014 14:24:41 EDT from danielhz @ Uncensored Subject: Charset tag in the Webcity interface

Hello all,

I started using Citadel as an organizer for myself a few days ago. However, I miss the tag

<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />

in the web interface. As I write in Spanish with UTF-8, I change manually the browser default charset to see the non ASCII characters that are necessary  in Spanish. I suppose I could update some HTML files in /usr/share/citadel-webcit/static to include the charset tag, but I am not sure if it is the best way to customize Webcity. Maybe it is a customization option that I do not found yet in the documentation. Is there?

Best,

Daniel Hernández



I can see your umlauts over here without problems ;-)

Seriously, the html thing is not the only place to look for encoding information.

Webcit puts it into the HTTP headers:

 
Content-Type  : text/html; charset=UTF-8

Thanks, I see that my server does not send that HTTP header. It could be that my server uses WebCit 8.14 and this sever is running WebCit 8.29?

This has been around since we first introduced I18N in version 6 half a dozend years ago.

do you use an apache/nginx/... proxy which may remove this header?



[#] Mon Sep 08 2014 09:24:40 EDT from dothebart @ Uncensored

Subject: Re: Citadel on Ubuntu Utopic

[Reply] [ReplyQuoted] [Headers] [Print]

 

Sat Sep 06 2014 11:12:30 EDT from markc @ Uncensored Subject: Citadel on Ubuntu Utopic

Hi, I am wondering if anyone else here has tried to install the citadel 8.24 packages on k/ubuntu 14.10?

The client and webcit installed but the server fails without any indication why. I am wondering if I should persist and try to figure out why it's not installing or am I pushing it my trying to install on a pre-release of Ubuntu?



it could be that it fails to start citserver due to some strange reason.

it will work if you just run the /usr/lib/citadel-server/setup alone - so some minor breakage.



[#] Tue Sep 09 2014 13:56:28 EDT from fhernandez36 @ Uncensored

Subject: error when try to send email

[Reply] [ReplyQuoted] [Headers] [Print]

Hello all

Im user of vtiger and Citadel, both systems works great except in one step:

when in vtiger I define a schedule report, (functionality for send a report automatically in some defined date) the email never arrive to the recipient, and I only see in sent email folder in from email this:

message you sent could not be delivered to some or all of its recipients.
The following addresses were undeliverable:

user@domain.com: <@hawk233>: no local part
otheruser@domain2.com: 5.5.2 Syntax error. wa16si13995556icb.86 - gsmtp

what I can see is the @hawk233 mean part of the name of my server

I have been spend about one month trying to fix it without success, last week I try to install postfix for replace citadel but Vtiger work very bad with this, then I go back and I need somebody's expert help

Thanks in advance.

 

I'm rocky in citadel configuration, then I'll appretiate your patience

Francisco



[#] Tue Sep 09 2014 14:57:48 EDT from fhernandez36 @ Uncensored

[Reply] [ReplyQuoted] [Headers] [Print]

Sorry, forget the version Im on ubuntu 12LTS with Citadel 8.24 with WebCit 8.24, server build 8.24

[#] Tue Sep 09 2014 16:29:32 EDT from jame @ Rocasa Mail System

Subject: Re: BinkD, fidonet?

[Reply] [ReplyQuoted] [Headers] [Print]

 

Fri Sep 05 2014 14:48:06 EDT from jame Subject: Re: BinkD, fidonet?

 

Thu Sep 04 2014 14:31:22 EDT from wduchene @ Uncensored Subject: BinkD, fidonet?

I've been Googling quite a bit, and can't seem to find any solution - but is there a work around, howto, or means of exchanging messages between something like binkd and citadel? I'd like to try out citadel with fidonet and am stopped short at the message conversion.

I also am interested in that (It was one of the reasons I decided to start using citadel) and conversion between the two is indeed what needs to done.  The possible interface via NNTP bring some possibilities if/when that becomes available. In the mean time I'd thought to try using ifmail/iftoss (from ifgate, which is in Debian) but I've had need to investigate other issues so haven't had a chance yet.

 

 

And while that's still not working;  the BBS program I've been using for years (because it's always had a usable web interface) has a mailing list interface availble for the conferences, and I'm experimenting with that.

 

 

jame

 



[#] Wed Sep 10 2014 03:42:55 EDT from easku1234 @

[Reply] [ReplyQuoted] [Headers] [Print]

NEW UPLOAD: 'aaa.txt'
application/octet-stream

[#] Wed Sep 10 2014 08:51:32 EDT from jame @ Rocasa Mail System

Subject: Re: BinkD, fidonet?

[Reply] [ReplyQuoted] [Headers] [Print]

 

Thu Sep 04 2014 17:33:05 EDT from dothebart @ Uncensored Subject: Re: BinkD, fidonet?

(if not an imap bridge is available on the fidonet side)

 

I'd be most interested in how that is or was done?

 

 


Jame

 



[#] Thu Sep 11 2014 02:08:07 EDT from dothebart @ Uncensored

Subject: Re: BinkD, fidonet?

[Reply] [ReplyQuoted] [Headers] [Print]

 

Wed Sep 10 2014 08:51:32 EDT from jame @ Rocasa Mail System Subject: Re: BinkD, fidonet?

 

Thu Sep 04 2014 17:33:05 EDT from dothebart @ Uncensored Subject: Re: BinkD, fidonet?

(if not an imap bridge is available on the fidonet side)

I'd be most interested in how that is or was done?


Jame

I don't know which protocols you've got available on the fidonet side.If Imap, or POP3 is on the list, imapcopy or fetchmail may be viable alternatives.



[#] Fri Sep 12 2014 13:09:32 EDT from friday @ Uncensored

Subject: Disable outside SMTP Relay?

[Reply] [ReplyQuoted] [Headers] [Print]

I recently got through as disastrous ASSP proxy server install. It was a train wreck, and too buggy for use. But, one thing I did appreciate about ASSP was the ability to disable any attempts to relay mail from an outside source. 

But, I had to disable ASSP.

So as of now, when port 25 is forwarded from our public IP to our internal NAT'd Citadel box, any outside source could potentially guess a user account and password, and spam the world, causing the IP to be RBL'd.

Is there anyway to disable this by limiting the ability to relay mail to the internet from only internal subnets?



[#] Sat Sep 13 2014 07:44:41 EDT from samuel @ Uncensored

Subject: 503 errors

[Reply] [ReplyQuoted] [Headers] [Print]

Good Day

I work at a transport company and we have recently installed a new mail server with citadel software, the system works fine however, the 503 service unavailable error keeps giving us down time every few days.

all services have been checked on the centos terminal and are running but for some reason we still cannot access our email or the online user interface which when not available does not allow our emails to work

any assistance will be much appreciated.

Kind regards

Samuel



[#] Sat Sep 13 2014 10:58:59 EDT from botcrusher @ Uncensored

Subject: citadel on RPI

[Reply] [ReplyQuoted] [Headers] [Print]



[#] Sat Sep 13 2014 11:02:41 EDT from botcrusher @ Uncensored

Subject: citadel on RPI

[Reply] [ReplyQuoted] [Headers] [Print]

For some reason, after installing citadel it worked quite well for some time, then for no apparent reason, vanished!

it quite literally vanished, i am the only user, and in this case nobody had access to the pi's login. The strange thing is that when i try launching citadel i get this error:

Attaching to server...

Can't connect: no such file or directory

 

 



[#] Sun Sep 14 2014 07:17:27 EDT from dothebart @ Uncensored

Subject: Re: Disable outside SMTP Relay?

[Reply] [ReplyQuoted] [Headers] [Print]

Fri Sep 12 2014 13:09:32 EDT from friday @ Uncensored Subject: Disable outside SMTP Relay?

I recently got through as disastrous ASSP proxy server install. It was a train wreck, and too buggy for use. But, one thing I did appreciate about ASSP was the ability to disable any attempts to relay mail from an outside source. 

But, I had to disable ASSP.

So as of now, when port 25 is forwarded from our public IP to our internal NAT'd Citadel box, any outside source could potentially guess a user account and password, and spam the world, causing the IP to be RBL'd.

Is there anyway to disable this by limiting the ability to relay mail to the internet from only internal subnets?

nope, its not possible to disable relaying.

You have to lean on your users not to loose their passwords. However, in reality, this happenes, and counter measures have to be taken: http://citadel.org/doku.php/faq:spam:recover

I guess a read-only mail system wouldn't be that usefull?

You can however rate limit the outbound SMTP queue, or use iptables to limit the number of connection attempts to your server.



[#] Sun Sep 14 2014 07:19:10 EDT from dothebart @ Uncensored

Subject: Re: 503 errors

[Reply] [ReplyQuoted] [Headers] [Print]

 

Sat Sep 13 2014 07:44:41 EDT from samuel @ Uncensored Subject: 503 errors

Good Day

I work at a transport company and we have recently installed a new mail server with citadel software, the system works fine however, the 503 service unavailable error keeps giving us down time every few days.

all services have been checked on the centos terminal and are running but for some reason we still cannot access our email or the online user interface which when not available does not allow our emails to work

any assistance will be much appreciated.

Kind regards

Samuel

the information you provide is a little sparse. Whats the additional error message of the 503? which version do you use? Do you use apache/nginx proxy? ...



[#] Sun Sep 14 2014 07:20:51 EDT from dothebart @ Uncensored

Subject: Re: citadel on RPI

[Reply] [ReplyQuoted] [Headers] [Print]

 

Sat Sep 13 2014 11:02:41 EDT from botcrusher @ Uncensored Subject: citadel on RPI

For some reason, after installing citadel it worked quite well for some time, then for no apparent reason, vanished!

it quite literally vanished, i am the only user, and in this case nobody had access to the pi's login. The strange thing is that when i try launching citadel i get this error:

Attaching to server...

Can't connect: no such file or directory

Did you check all services are running? (and not restarting)

http://citadel.org/doku.php/faq:mastering_your_os:ps#checking.what.services.are.running

and are providing the services

http://citadel.org/doku.php/faq:mastering_your_os:net#networking

and no error information can be found in the syslog?



[#] Mon Sep 15 2014 21:49:30 EDT from botcrusher @ Uncensored

Subject: Re: citadel on RPI

[Reply] [ReplyQuoted] [Headers] [Print]

Thanks for your help, i figured out that it was a system fault and not a problem with citadel, turns out the system DID delete it. oddly enough whAtever storage daemon didnt throw any errors or warnings untill the whole system started blowing up, a quick run of df -h revealed the sd card was 100% capped.

 



Go to page: First ... 18 19 20 21 [22] 23 24 25 26 ... Last